INT TimeCode Tool
Version 1.0.0

Japanese description is followed by English below.

DaVinci Resolve 用 Workflow Integration プラグインです。
23.976 タイムラインのタイムコードをリアルタイムで
29.97DF / 59.94DF に変換表示します。
オフライン／オンライン作業時のタイムコード確認用ツールです。

⸻

対応環境
• DaVinci Resolve Studio 20 以降
• macOS / Windows

⸻

インストール方法

■ macOS

macOS版は以下の2種類を配布しています：

• Apple Silicon（Mシリーズ）
• Intel（x64）

ご使用のMacに対応した版をダウンロードしてください。

zipを解凍後、「INTTimeCodeTool」フォルダを以下へコピー：

/Library/Application Support/Blackmagic Design/DaVinci Resolve/Workflow Integration Plugins/

※「INT-TimeCode-Tool_v1.0.0_macOS」フォルダ全体ではなく、
　中の「INTTimeCodeTool」フォルダのみをコピーしてください。

※Workflow Integration Plugins フォルダが存在しない場合は作成してください。

Resolve を再起動後、上部メニューバーから：

Workspace → Workflow Integrations → INT TimeCode Tool

※日本語UIの場合：
ワークスペース → ワークフローの統合 → INT TimeCode Tool

【起動しない場合】
macOSのセキュリティ設定により読み込まれない場合があります。
その場合はターミナルで以下を実行してください：

xattr -dr com.apple.quarantine “/Library/Application Support/Blackmagic Design/DaVinci Resolve/Workflow Integration Plugins/INTTimeCodeTool”

⸻

■ Windows

zipを解凍後、「INTTimeCodeTool」フォルダを以下へコピー：

C:\ProgramData\Blackmagic Design\DaVinci Resolve\Support\Workflow Integration Plugins

※「INT-TimeCode-Tool_v1.0.0_Windows」フォルダ全体ではなく、
　中の「INTTimeCodeTool」フォルダのみをコピーしてください。

※Workflow Integration Plugins フォルダが存在しない場合は作成してください。
※「ProgramData」は通常非表示フォルダです。
※「C:\Users\」配下ではない点に注意してください。

エクスプローラーのアドレスバーに上記パスを貼り付けるか、
「表示 → 表示 → 隠しファイル」を有効にしてアクセスしてください。

Resolve を再起動後、上部メニューバーから：

Workspace → Workflow Integrations → INT TimeCode Tool

※日本語UIの場合：
ワークスペース → ワークフローの統合 → INT TimeCode Tool

⸻

アップデート方法

既存バージョンがインストールされている場合は、
新しい「INTTimeCodeTool」フォルダを同じ場所に上書きコピーしてください。

通常は削除する必要はありません。
更新後は DaVinci Resolve を再起動してください。

読み込みに問題がある場合のみ、既存フォルダを削除してから再コピーしてください。

⸻

使い方

表示内容

上段：タイムラインの実タイムコード
下段：変換結果（29.97DF / 59.94DF）

表示レイアウト

2行表示（Timeline / Converted）
1行表示（Timeline FPS）
1行表示（Converted FPS）

Settings

歯車アイコンから設定画面を開き、以下を変更できます：

・Size（表示サイズ）：Small, Medium, Large
・Layout（レイアウト）：Timeline / Converted, Timeline FPS, Converted FPS
・Output（出力TC）：29.97DF, 59.94DF
・Always on Top（常時前面表示）：ON, OFF

Update

Settings 内のボタンから最新版を確認できます。
新しいバージョンがある場合、ボタン表示は
「Check for Updates」から「Copy Download Link」に変わります。

その状態でボタンを押すと、ダウンロードリンクをクリップボードにコピーできます。

⸻

注意事項

タイムラインFPSが23.976以外の場合、変換結果は保証されません。
再生中はリアルタイム更新のため、表示がアニメーション的に見えることがあります。
フレーム単位での確認は、停止時のタイムコードをご参照ください。
Windowsではフォント描画の違いにより、表示の見た目（文字幅や配置など）がmacOSと若干異なる場合がありますが、タイムコードの計算結果には影響ありません。

⸻

ライセンス

本ソフトウェアは1ユーザーライセンスです。
再配布・改変・再販売は禁止されています。
詳細は LICENSE ファイルをご参照ください。

⸻

© 2026 Genta Tamaki / Interceptor Inc.
https://www.interceptor-inc.com/

⸻

INT TimeCode Tool

INT TimeCode Tool is a Workflow Integration plugin for DaVinci Resolve.
It converts 23.976 timeline timecode into 29.97DF / 59.94DF in real time.
Designed for accurate timecode reference during offline/online workflows.

⸻

Requirements
• DaVinci Resolve Studio 20 or later
• macOS / Windows

⸻

Installation

■ macOS

macOS builds are distributed separately:

• Apple Silicon (M-series)
• Intel (x64)

Please download the version that matches your Mac.

After extracting the zip, copy the “INTTimeCodeTool” folder to:

/Library/Application Support/Blackmagic Design/DaVinci Resolve/Workflow Integration Plugins/

Do NOT copy the entire “INT-TimeCode-Tool_v1.0.0_macOS” folder.
Copy only the “INTTimeCodeTool” folder inside it.

If the Workflow Integration Plugins folder does not exist, create it.

Restart Resolve, then open:

Workspace → Workflow Integrations → INT TimeCode Tool

If the plugin does not load, run:

xattr -dr com.apple.quarantine “/Library/Application Support/Blackmagic Design/DaVinci Resolve/Workflow Integration Plugins/INTTimeCodeTool”

⸻

■ Windows

After extracting the zip, copy the “INTTimeCodeTool” folder to:

C:\ProgramData\Blackmagic Design\DaVinci Resolve\Support\Workflow Integration Plugins

Do NOT copy the entire “INT-TimeCode-Tool_v1.0.0_Windows” folder.
Copy only the “INTTimeCodeTool” folder inside it.

If the Workflow Integration Plugins folder does not exist, create it.
Make sure this is NOT inside the “Users” folder.

Restart Resolve, then open:

Workspace → Workflow Integrations → INT TimeCode Tool

⸻

Updating

If a previous version is already installed,
simply overwrite the existing “INTTimeCodeTool” folder with the new one.

Deletion is usually not required.
Restart DaVinci Resolve after updating.

If any issue occurs, delete the existing folder and copy it again.

⸻

Usage

Display

Top: Original timeline timecode
Bottom: Converted timecode (29.97DF / 59.94DF)

Display Layout

2-line display (Timeline / Converted)
Single-line display (Timeline FPS)
Single-line display (Converted FPS)

Settings

Open the settings panel from the gear icon to adjust:

・Size: Small, Medium, Large
・Layout: Timeline / Converted, Timeline FPS, Converted FPS
・Output: 29.97DF, 59.94DF
・Always on Top: ON, OFF

Update

Use the button in Settings to check for new versions.
If a new version is available, the button label changes
from “Check for Updates” to “Copy Download Link”.

Pressing the button in that state copies the download link to the clipboard.

⸻

Notes

Conversion accuracy is guaranteed only when the timeline frame rate is 23.976.
During playback, the display may appear animated due to real-time updates.
For frame-accurate confirmation, please check the timecode while playback is stopped.
On Windows, visual appearance (such as character spacing and alignment) may differ slightly from macOS due to font rendering differences. This does not affect timecode calculation accuracy.

⸻

License

This software is licensed for use by a single user.
Redistribution, modification, or resale is prohibited.
See LICENSE for full terms.

⸻

Changelog

See CHANGELOG.md for release history.